大采高综放工作面强动压端头顶板控制技术

为了解决大采高综放工作面回风侧端头顶板控制问题,针对马道头矿8211工作面的地质情况,通过对回风顺槽超前注浆加固,提高超前支护范围和支护强度,并对回风侧端头三角区煤壁和顶板进行化学浆加固的技术方案,有效控制了顺槽超前区围岩变形和工作面回风侧端头三角区煤壁片帮,保证了工作面端头区顶板安全。     

辉县部分景区地质灾害危险性评估及防治措施研究

为了给辉县景区减灾防灾提供地质依据,根据实际工程概况,研究了辉县部分景区地质灾害危险性预测评估及防治措施,预测评估了工程建设中、建设后可能引发或加剧地质灾害危险性,建设工程自身可能遭受已存在地质灾害危险性;评估了地质灾害危险性综合分区以及根据地质灾害危险性、防治难度和防治效益,对评估区适宜性作出评价,提出了防治地质灾害的措施和建议。     

Quality assurance and quality control of subgrade compaction using the dynamic cone penetrometer

The Dynamic Cone Penetrometer (DCP) is a device that is used in the construction industry for the assessment of in situ soil compaction quality. Over the past few decades, numerous correlations have been developed between the DCP test results and soil strength and stiffness parameters. This paper proposes a comprehensive set of criteria and recommendations for quality control (QC) of compacted subgrade that take into account the inherent statistical variability of DCP test results. For the development of the QC criteria, a new statistical methodology is used to extract representative test values from the raw field DCP test data. In order to use the proposed QC criteria, soils are first classified into two broad categories (fine-grained and coarse-grained) depending on their fabric and response to compaction efforts. Test results indicate that (i) for fine-grained soils, the DCP test values have good correlation with the plasticity index (PI), which is indicative of the type and amount of clay content of the soil and (ii) for coarse-grained soils, the DCP test values have good correlation with the optimum water content of the soil, which is directly related to its in situ density. DCP blow count correlation equations are presented for both soil categories. Recommendations for field DCP testing and data analysis are also provided to highlight the significance of the statistical distribution of the DCP test results in QC testing of compacted subgrade.     

Reduced basis method for managed pressure drilling based on a model with local nonlinearities

To circumvent restrictions of conventional drilling methods, such as slow control actions and inability to drill depleted reservoirs, a drilling method called managed pressure drilling (MPD) has been developed. In MPD, single-phase flow processes can be modeled as a feedback interconnection of a high-order linear system and a low-order nonlinear system. These nonlinearities appear locally both inside and at the boundaries of the computational domain. To obtain a fast simulation platform for real-time purposes (eg, online model-based controller implementation), model order reduction is required for MPD. However, the local nonlinearities render applying model order reduction techniques challenging. In this study, a new approach is proposed to deal with such nonlinearities within the reduced basis (RB) context and it is successfully tested on a model for MPD. Contrary to the classical RB technique, the proposed approach not only does not generate nonphysical spikes at the locations of these local nonlinearities but also yields high speedup factors. The obtained reduced-order model can be used for efficient online simulation and controller design for drilling systems with MPD.     

宁夏红寺堡盆地隐伏古隆起成因机制及其对区域沙漠化的影响

目前对于青藏高原东北缘活动构造研究多集中于活动断裂带的活动性,而对夹持于其间的沉积盆地构造格架及活动性研究甚少。以夹持于烟筒山断裂与牛首山—罗山断裂之间的宁夏红寺堡盆地为研究对象,采用重力资料重处理解译、音频大地电磁测深(AMT)和地震勘探相结合,揭示红寺堡盆地隐伏构造特征,并进一步采用盆山一体化思路分析隐伏构造的成因机制及其对区域沙漠化的控制作用。结果表明:青藏高原在中新世末发生强烈的NE向推挤、扩展和隆升,红寺堡盆地由坳陷盆地转变为挠曲盆地; 在青藏高原NE向扩展的影响下,烟筒山断裂发生强烈的逆冲作用,古生代—中生代基底逆冲于古近系—新近系之上,受构造变形影响的最新地层为中新统彰恩堡组; 红寺堡盆地内的隐伏古隆起呈NW—SE向,与烟筒山构造带具有相同的构造动力学背景,受青藏高原NE向扩展影响形成于中新世末,并且至今仍具有活动性; 隐伏古隆起周缘断裂的活动破坏了地表稳定性、蓄水能力和地表植被,导致区域沙漠化呈现有规律的NW—SE向带状展布。该研究成果对于宁夏红寺堡盆地区域稳定性评价及沙漠化的综合治理具有现实指导意义。     

起重机械防碰装置试验系统的设计

防碰装置是起重机械重要的安全防护装置,其性能质量直接关系到人员和设备安全。常规的防碰装置性能试验方法难以保证试验数据的精度和可靠性。针对防碰装置的工作特点和试验要求,从试验原理、系统结构、运行逻辑等方面入手,设计一套能模拟防碰装置实际运行工况,自动进行性能试验和数据采集处理,精度高、重复性好的试验系统,可以有效提升防碰装置检测能力。     

小型特种精细化工过程自动化和信息化研究发展趋势探讨

针对采取小批量间歇性批次生产方式、工艺介质腐蚀性强、危险性大的小型特种精细化工生产工艺研究试验过程自动化、信息化程度不高，导致工艺研究试验中获取数据较少、过程机理研究不够透彻、人工操作多、安全风险高、研究试验消耗大及效率不高等问题，综述了期待通过智能控制、在线分析、模拟仿真和虚拟制造、工况监测及预测性维护以及信息管理和生产调度等关键技术的研究和应用，提高小型特种精细化工生产工艺过程的自动化和信息化程度，实现小型特种精细化工生产工艺过程的数字化、虚拟化和智能化，降低生产安全风险和试验消耗，提高小型特种精细化工生产工艺研究试验的成功率和效率，达到小型特种精细化工生产工艺过程的数字化设计和精准生产的目标。     

基于机器视觉的机车齿轮毂全自动双轴拧紧机的设计和应用

设计了基于机器视觉的机车齿轮毂全自动双轴拧紧机,根据拧紧工艺和扭矩控制原理实现对螺栓拧紧力矩的控制;通过丝杠变径机构,实现不同规格齿轮毂螺栓拧紧;利用机器视觉实现螺栓位置的识别以及初始位置的确定;讨论了自动拧紧机控制系统的硬件组成和软件系统配置,并介绍了防错、防漏功能的设计流程。螺栓自动拧紧机可提高装配精度和操作效率,降低工人的劳动强度。     

预压力对压电驱动履带移动系统的性能影响

为了提高夹心式压电驱动移动系统的机械输出性能，提出了一种U型预压力调节机构，并开展了预压力对夹心式压电驱动履带移动系统输出性能影响关系的实验研究。首先，针对U型预压力调节机构的安装对夹心式压电振子的振动特性影响关系开展了有限元仿真分析，发现U型预压力调节机构始终处在夹心式压电振子的两相工作模态振动节点位置；其次，开展了夹心式压电驱动履带移动系统的原理样机的预压力调节测试实验，确定了系统的最大输出牵引力及其所对应的最佳预压力；最后，在最佳预压力工作状态下，开展了原理样机的牵引力特性、越障性能以及模拟月壤环境下的运动特性实验。研究结果表明，在最佳预压力工作状态下，夹心式压电驱动履带移动系统的机械输出性能最佳，为其进一步在月面巡视器上的应用提供了技术支持和试验基础。